fabricante de máquina de fusão de topo

RIYANG FUSÃO FABRICAÇÃO LIMITADA
casa / tudo / Butt Fusion Machine / Automatic Butt Fusion Machines /

Automatic Butt Fusion Machine V200 CNC 63MM-200MM

Automatic Butt Fusion Machine V200 CNC 63MM-200MM

Automatic Butt Fusion Machine V200 CNC 63MM-200MM
Automatic Butt Fusion Machine V200 CNC 63MM-200MMAutomatic Butt Fusion Machine V200 CNC 63MM-200MMAutomatic Butt Fusion Machine V200 CNC 63MM-200MMAutomatic Butt Fusion Machine V200 CNC 63MM-200MMAutomatic Butt Fusion Machine V200 CNC 63MM-200MM
CategoriasAutomatic Butt Fusion Machines
MarcaRIYANG
Especificações do produtoV200 CNC
CertificateCE, ISO9001
Packing MaterialPlywood Box
MOQ1set
Working Range63 - 200 MM
PortaShanghai
forma de pagamentoL/C, Western Union, T/T, Paypal
Baixar DOCpdf icon
Tempo de atualização2024/3/29
Informações detalhadas
Automatic Butt Fusion Machine V200 CNC 63MM-200MM
The RIYANG V-CNC series automatic hydraulic butt welding machine V200 CNC is applied to joint PE, PP, PPR and PVDF pipes and moulded fittings. 

Selection of components with a long service life ensures a low maintenance and repair, friendly and reliable operation.
Product Details
WELDING RANGE O.D.
63MM - 200MM
PISTON AREA
6.27 CM²
POWER SUPPLY
220V±10%, 50/60HZ
TEMPERATURE RANGE
MAX. 320ºC
HEATER POWER
1.5KW
PACKING DIMENSION
820*400*440 MM
TRIMMER POWER
0.75KW
450*470*550 MM
PUMP POWER
0.75KW
650*340*380 MM
WORKING PRESSURE RANGE
0 - 80 BAR
GROSS WEIGHT
156KGS
V-CNC series Characteristics
WELDING CONTROL SYSTEM
FULLY MONITORED BY CNC CONTROL UNIT
DATA LOGGING CAPACITY
2000 REPORTS
WELDING MONITORING SYSTEM
AMBIENT TEMPERATURE, INPUT VOLTAGE, HEATING TEMPERATURE, WELDING PRESSURE, WELDING TIMES HEATING OPERATION, TRIMMING OPERATION, MEMORY CONTROL.
WELDING STANDARD
DVS, ISO, WIS, UNI AND OTHERS UPON REQUEST
LANGUAGES
AVAILABLE UPON REQUEST
WARRANTY PERIOD
2 YEARS
Basic Frame

Featured by

- Oil seal kit, origins from Germany, make sure that the pressure performance stays in a more stable way.

- 4sets quick coupling helps the operator to prepare the machine better before and after welding, and we use STUCCHI which from Italy ensures no hydraulic oil leakages when unplug or plug in.

- Using an integral shaft (top chromate treatment) instead of the assembled shaft, ensure the chassis strength to avoid possible frame twist or deform when dragging the pipe with extreme parameters.
Heating Plate

Featured by

- We use Dupont from the USA for coating the heating plate, which is the best in the industry. It's many stickers on an aluminum plate, more non-sticky to plastic pipes surface. The temperature deviation of different points on the heating plate is 2-3 degrees (small size machine) and 5-6 degrees (big size machine). 

Trimmer

Featured by

- Safety Switch, which guarantees the operators' security, even with power on, the trimmer will not be running if operators do not press the button.

Support

Featured by

- Ergonomic design
Hydraulic Power Station

Featured by

- The CNC hydraulic control box is available for all RIYANG basic model machines, covering the size from O.D 50mm through O.D 1200mm. A fully encased control box makes the protection level up to IP 54.

- Due to the unique powertrain, it could not only create sufficient hydraulic power during the welding procedure but also makes sure precise control. And most importantly, it greatly reduces the weight of the control box. And the servo-motor applied significantly reduces the failure possibility and maintenance cost.

- All connections sockets are located at the back of the hydraulic control unit, including sockets for the trimmer tool and heating plate. No additional power distributor is needed.

- Various welding standards (DVS, ISO, WIS, etc.) could be pre-installed by different languages upon your request. All welding reports could be saved immediately to internal memory with a capacity of 2000 reports after welding accomplished, or print the report. Meanwhile, it is available for downloading through the USB interface.

- All RIYANG V-CNC series hydraulic control box is featured with PLC touch screen, extremely user-friendly RFID access technology. Troubleshooting and program upgrades are available for remote control.

- When the heating plate hooks up with the machine chassis, inserting or release the heater will be controlled remotely by a hydraulic unit, which is the same as a trimmer. These characteristics prevent the operators from being injured. 

Data Logger
Aluminum Stub End Holder
Roller Support
Inserts
Avaliação
  • Carregando...
produtos relacionados
    MÁQUINA DE FUSÃO DE BUNDA
    Você precisa da ajuda de uma máquina de fusão? Entre em contato conosco agora?
    *Email
    *Nome
    *Tel
    *Título
    *Contéudo
    Upload
    • Suporta apenas .rar/.zip/.jpg/.png/.gif/.doc/.xls/.pdf, máximo de 20M